Acrylic Polymer | Acrylic Polymers | Acrylic Adhesive | manufacturer supplier Wholesale Distributors OEM ODM-acrylic-polymer.com Acrylic Polymer manufacturer and Acrylic Polymers supplier also Wholesale Distributors OEM ODM-over 88,939 ,Acrylic Adhesive,Acrylic Latex Paint,Acrylic Concrete Sealer buyers around the world at acrylic-polymer.com http://www.acrylic-polymer.com/ Mon, 17 Jul 2017 22:09:50 -0600 Cement Latex <img src='productpic/ps_7gp11474854052.jpg' /><br>Elastic cement latex CE-880 is an acrylic-styrene emulsion copolymer with special protecting system and is compatible with cement and many other types of filler. It is designed as the waterproof product for construction application by mixing one part of CE-880 and one part of cement-based powder. The resulting mixture will form a waterproofing membrane with excellent water resistance and elasticity when it is applied on the substrate and air-dried. The product is an environmentally friendly aqueous dispersion and that is suitable for use in new construction, restoration of old construction, indoor and outdoor.<br /> <br /> Elastic Cement Latex CE-880 has the following benefits:<br /> <ol> <li> Excellent water resistance suitable for outdoor and indoor usage </li> <li> Unequalled bond strength to a wide variety of substrates such as old cement, brickwork, wood, and metal </li> <li> Environmentally friendly </li> <li> Can be worked on a wet surface </li> <li> Superior mechanical (tensile strength and elongation) properties </li> <li> Excellent workability </li> <li> Suitable for painting, tiling or other construction work </li> <li> Not like PU, it can be partially worked on the restoration area </li> </ol> <br /> Typical Physical Properties<br /> Appearance: White emulsion<br /> Solids: 54.0 ±1.0%<br /> pH: 8.0 ±1.0<br /> Specific gravity: 1.06<br /> Viscosity (cps): 5,000 ± 2,000cps (Brookfield, RVT, #3, 10 rpm)<br /> Tg: -10℃<br /> <br /> Method of Use<br /> Prepare a good, clean surface at all times. Remove all loose, disintegrated material, dirt grease, oil, and efflorescence. Substrate must be structurally sound. A mortar can be prepared by thoroughly mixing equal weight of cement-based powder and CE-880 before application. It is easy to use and the coverage of CE-880 will depend on surface porosity. Usually, 1Kg CE-880 can cover about one square meter at about 1mm dry film thickness and give excellent waterproof performance. If apply on a vertical surface, the addition of about 0.5% thickener is recommended for a better workability. http://www.acrylic-polymer.com/cement-latex.html Cement Latex http://www.acrylic-polymer.com/productpic/ps_7gp11474854052.jpg http://www.acrylic-polymer.com/cement-latex.html Latex Grout Additive <img src='productpic/ps_94gz1474854201.jpg' /><br>Elastic cement latex CE-881 is an acrylic-styrene emulsion copolymer with special protecting system and is compatible with cement and many other types of filler. It is designed as the waterproof product for construction application by mixing one part of CE-881 and one part of cement-based powder. The resulting mixture will form a waterproofing membrane with excellent water resistance and elasticity when it is applied on the substrate and air-dried. The product is an environmentally friendly aqueous dispersion and that is suitable for use in new construction, restoration of old construction, indoor and outdoor.<br /> <br /> Elastic Cement Latex CE-881 has the following benefits:<br /> <ol> <li> Excellent water resistance suitable for indoor and outdoor usage </li> <li> Unequalled bond strength to a wide variety of substrates such as old cement, brickwork, wood, and metal </li> <li> Excellent workability </li> <li> Can be worked on a wet surface </li> <li> Environmentally friendly </li> <li> Superior mechanical (tensile strength and elongation) properties </li> <li> Suitable for painting, tiling or other construction work </li> <li> Not like PU, it can be partially worked on the restoration area. </li> </ol> <br /> Typical Physical Properties<br /> Appearance: White emulsion<br /> Solids: 49.0 ±1.0%<br /> pH: 8.5 ±1.0<br /> Specific gravity: 1.06<br /> Viscosity (cps): 25,000 ± 10,000 cps (Brookfield, RVT, #6, 5 rpm)<br /> Tg: -5℃<br /> <br /> Method of Use<br /> Prepare a good, clean surface at all times. Remove all loose, disintegrated material, dirt grease, oil, and efflorescence. Substrate must be structurally sound. A mortar can be prepared by thoroughly mixing equal weight of cement-based powder and CE-881 before application. It is easy to use and the coverage of CE-880 will depend on surface porosity. Usually, 1Kg CE-880 can cover about one square meter at about 1mm dry film thickness and give excellent waterproof performance. If apply on a vertical surface, the addition of about 0.5% thickener is recommended for a better workability. http://www.acrylic-polymer.com/latex-grout-additive.html Latex Grout Additive http://www.acrylic-polymer.com/productpic/ps_94gz1474854201.jpg http://www.acrylic-polymer.com/latex-grout-additive.html Acrylic Cement Additive <img src='productpic/ps_bv9p1474854292.jpg' /><br>Cement Reinforcement Emulsion CA-661 is an acrylic emulsion copolymer specially designed to overcome the inherent weakness of cement. It improves adhesion, impact strength, flexural strength, and thin section fragility of cement. It is suitable for use in new construction as well as restoration of old constructions.<br /> <br /> Cement Reinforcement Emulsion CA-661 has the following benefits:<br /> For internal and external use<br /> Excellent water and abrasion resistance<br /> Unequalled bond strength to a wide variety of substrates such as old cement, brickworks, wood, and metal<br /> Excellent surface finishing<br /> Environmentally friendly; water-based without solvent pollution and odor<br /> Over 3 hours work time after mixing CA-661 with cement<br /> Excellent workability<br /> <br /> Typical Physical Properties<br /> <ol> <li> Appearance: White emulsion </li> <li> Solids: 49.0 ±1.0% </li> <li> pH: 8.5 ±1.0 </li> <li> Specific gravity: 1.06 </li> <li> Viscosity: 100 ± 50 cps (Brookfield, RVT, #3, 10 rpm) </li> <li> Tg: 15℃ </li> </ol> <br /> Method of Use<br /> Prepare a good, clean surface at all times. Remove all loose, disintegrated material, dirt, grease, oil, and efflorescence. Substrate must be structurally sound. Prepare the solid components (100 parts cement and 300 parts sand) and the liquid components (15 parts Cement Reinforcement Emulsion CA-661 and 45 parts water). A mortar is then prepared by thoroughly mixing the solid and the liquid components. The ratio between solid and liquid components can be changed due to the size of granules and water content of sand. http://www.acrylic-polymer.com/emulsion-acrylic-adhesive.html Acrylic Cement Additive http://www.acrylic-polymer.com/productpic/ps_bv9p1474854292.jpg http://www.acrylic-polymer.com/emulsion-acrylic-adhesive.html Acrylic Primer <img src='productpic/ps_kgz1474854425.jpg' /><br>Acrylic Primer AP-300 is an acrylic emulsion copolymer with very fine particle sizes and good adhesion to many different substrates. It can penetrate into the substrates to form a strong network, provide high level of water resistance, improve the adhesion between old and new concretes, and help the workability for self-leveling concretes.<br /> <br /> Acrylic Primer AP-300 has the following benefits:<br /> <ol> <li> Excellent water and abrasion resistance </li> <li> Good adhesion to the substrates and excellent water repellency </li> <li> Good workability </li> <li> Environmental friendly </li> <li> Suitable for any construction work </li> </ol> <br /> Typical Physical Properties<br /> Appearance: Light translucent emulsion<br /> Solids: 49.0 ±1.0%<br /> pH: 8.0 ±1.0<br /> Specific gravity: 1.06<br /> Viscosity: 8,000 ± 3,000 cps (Brookfield, RVT, #6, 5 rpm)<br /> Tg: 15℃<br /> <br /> Method of Use<br /> Remove all loose material and contaminates from substrate. Apply a thin uniform coating of Acrylic Primer AP-300&nbsp; (diluted with 4X volumes of water) using either a spray or a brush. About thirty minutes later, apply the second coating of Acrylic Primer AP-300 (diluted with 2X volumes of water). Allow Primer to dry and make sure the ground is tack free (about 30 minutes), then apply self-leveling underlayment, concrete, elastic cement or any other construction works. The coverage of Acrylic Primer AP-300 will depend on surface porosity; usually 1Kg Acrylic Primer AP-300 can cover about 5 to 7 square meters. http://www.acrylic-polymer.com/acrylic-primer.html Acrylic Primer http://www.acrylic-polymer.com/productpic/ps_kgz1474854425.jpg http://www.acrylic-polymer.com/acrylic-primer.html Waterproof Latex <img src='productpic/ps_jp71474854520.jpg' /><br>Waterproofing Latex M-272 is an acrylic-styrene emulsion polymer that was designed for the manufacture of waterproofing paints which provide a good balance of performance properties; excellent adhesion, durability, film flexibility and strength. Formulating with Waterproofing Latex M-272 emulsion polymer is straightforward in that no special ingredients are required. Low levels of coalescent, dispersant, and thickener should be utilized initially, and increased as needed for the application and performance. The clear film of Waterproofing Latex M-272 has a tensile strength at about 15 kg/cm<sup>2</sup> and 900% elongation.<br /> <br /> This product has the following benefits:<br /> <ol> <li> Excellent adhesion to a wide variety of substrates </li> <li> Excellent water resistance </li> <li> Excellent weatherability </li> <li> Water-based without solvent pollution </li> <li> Excellent workability </li> </ol> <br /> Typical Physical Properties<br /> Appearance: White emulsion<br /> Solids: 48.5 ± 1.0%<br /> pH: 8.0 ± 1.0<br /> Specific gravity: ~1.06<br /> Viscosity (cps): 2,500 ± 500 cps (Brookfield, RVT, #3, 10 rpm)<br /> Tg: About 5℃ http://www.acrylic-polymer.com/waterproof-latex.html Waterproof Latex http://www.acrylic-polymer.com/productpic/ps_jp71474854520.jpg http://www.acrylic-polymer.com/waterproof-latex.html Latex Waterproofing <img src='productpic/ps_vbyp1474854699.jpg' /><br>Waterproofing Latex TA-140 is an acrylic-styrene emulsion polymer that was designed for the manufacture of waterproofing paints which provide a good balance of performance properties; excellent adhesion, durability, film flexibility and strength. Formulating with Waterproofing Latex TA-140 emulsion polymer is straightforward in that no special ingredients are required. Low levels of coalescent, dispersant, and thickener should be utilized initially, and increased as needed for the application and performance. The clear film of Waterproofing Latex TA-140 has a tensile strength at about 5 kg/cm<sup>2</sup> and &gt;1000% elongation.<br /> <br /> This product has the following benefits:<br /> <ol> <li> Excellent adhesion to a wide variety of substrates </li> <li> Excellent water resistance </li> <li> Excellent weatherability </li> <li> Water-based without solvent pollution </li> <li> Excellent workability </li> </ol> <br /> Typical Physical Properties<br /> Appearance: White emulsion<br /> Solids: 49.0 ± 1.0%<br /> pH: 7.5 ± 1.0<br /> Specific gravity: ~1.06<br /> Viscosity (cps): 2,500 ± 500 cps (Brookfield, RVT, #3, 10 rpm)<br /> Tg: About -5℃ http://www.acrylic-polymer.com/latex-waterproofing.html Latex Waterproofing http://www.acrylic-polymer.com/productpic/ps_vbyp1474854699.jpg http://www.acrylic-polymer.com/latex-waterproofing.html Acrylic Paint Thickener <img src='productpic/ps_3iey1474854957.jpg' /><br>Thickener AET-709 is a synthetic acrylic thickener. It is alkali soluble and thickens instantly when neutralized to a pH between 7.5 and 8.5 with low thickening efficiency. It is designed for improving the high shear viscosity and the leveling of coating applications.The product is provided in latex form with very low viscosity and is suitable for most of water-based products.<br /> <br /> It has the following benefits:<br /> <ol> <li> Extremely easy to use </li> <li> Excellent runability for most of applications </li> <li> High electrolyte resistance </li> </ol> <br /> Typical Physical Properties:<br /> <ol> <li> Appearance: White emulsion </li> <li> pH: 3.0 ± 0.5 </li> <li> Solids: 29.5 ±1.0% </li> <li> Specific gravity: 1.05 </li> <li> Viscosity: &lt; 100 cps (Brookfield, RVT, #1, 5 rpm) </li> </ol> http://www.acrylic-polymer.com/acrylic-paint-thickener.html Acrylic Paint Thickener http://www.acrylic-polymer.com/productpic/ps_3iey1474854957.jpg http://www.acrylic-polymer.com/acrylic-paint-thickener.html Latex Paint Thickener <img src='productpic/ps_b6jn1474855092.jpg' /><br>Thickener AET-719 is a synthetic acrylic thickener. It is alkali soluble and thickens instantly when neutralized to a pH between 7.5 and 8.5 with very high aqueous thickening efficiency. The product is provided in latex form with very low viscosity and is suitable for most of water-based products.<br /> <br /> Thickener AET-719 has the following benefits:<br /> <ol> <li> Extremely easy to use and highly efficient </li> <li> Excellent workability for most of applications </li> <li> High electrolyte resistance </li> </ol> <br /> Typical Physical Properties:<br /> <ol> <li> Appearance: White emulsion </li> <li> pH: 3.0 ± 0.5 </li> <li> Solids: 29.5 ±1.0% </li> <li> Specific gravity: 1.05 </li> <li> Viscosity: &lt; 100 cps (Brookfield, RVT, #1, 5 rpm) </li> </ol> http://www.acrylic-polymer.com/latex-paint-thickener.html Latex Paint Thickener http://www.acrylic-polymer.com/productpic/ps_b6jn1474855092.jpg http://www.acrylic-polymer.com/latex-paint-thickener.html Paint Thickener <img src='productpic/ps_xqpc1474855187.jpg' /><br>Thickener AET-729 is a synthetic acrylic thickener. It is alkali soluble and thickens instantly when neutralized to a pH between 7.5 and 8.5. Because of its special molecular structure, it has a very high thickening efficiency, a unique rheology, and the viscosity will not drop at lower pH (about 6.0). The product is provided in latex form with low viscosity and is suitable for most of water-based products.<br /> <br /> Thickener AET-729 has the following benefits:<br /> <ol> <li> Extremely easy to use and highly efficient </li> <li> Excellent workability for most of applications </li> <li> High electrolyte resistance </li> </ol> <br /> Typical Physical Properties:<br /> <ol> <li> Appearance: White emulsion </li> <li> pH: 3.0 ±0.5 </li> <li> Solids: 29.5 ±1.0% </li> <li> Specific gravity: 1.05 </li> <li> Viscosity: &lt; 100 cps (Brookfield, RVT, #1, 5 rpm) </li> </ol> http://www.acrylic-polymer.com/paint-thickener.html Paint Thickener http://www.acrylic-polymer.com/productpic/ps_xqpc1474855187.jpg http://www.acrylic-polymer.com/paint-thickener.html Polymeric Thickener <img src='productpic/ps_cba1474855414.jpg' /><br>Thickener DP-225 is a synthetic thickener containing 2-Acrylamido-2-methyl-propane sulfonic acid sodium salt (AMPS) copolymers dispersed in a paraffin solvent and is developed for water based polymer products and polar organic solvents such as ethylene glycol, propylene glycol and glycerol. This product provides remarkable thickening power between pH 2 and pH 12, very good mechanical stability and electrolyte resistance. It is especially suitable for product systems which poly-acrylic acid thickeners are not capable for the application requirements. The product can be used directly and does not require the addition of ammonia or other alkali to the system.<br /> <br /> Thickener DP-225 has the following benefits:<br /> <ol> <li> Extremely easy to use and highly efficient </li> <li> High electrolyte resistance </li> <li> Good thickener for polar solvents </li> <li> Excellent workability </li> <li> Effective over a wide pH range </li> </ol> <br /> Typical Physical Properties<br /> <ol> <li> Appearance: Creamy liquid </li> <li> Solids: 46.0 ± 1.0% </li> <li> pH: 8.0 ± 1.0 </li> <li> Specific gravity: 1.22 </li> <li> Viscosity: 30,000 ± 10,000 (Brookfield, RVT, #6, 5 rpm) </li> </ol> <br /> Method of Use and Example<br /> Water or solvent is added to the pre-weighed DP-225 with gentle agitation to prepare a thickener stock. The results of two examples are shown in the following table: <br /> <table style="text-align:left;" width="450" cellspacing="0" cellpadding="0" border="1"> <tbody> <tr> <td> <p> Solvent </p> </td> <td> <p> D.I. Water </p> </td> <td> <p> Propylene Glycol </p> </td> </tr> <tr> <td> <p> DP-225 (w/w&nbsp;%) </p> </td> <td> <p> 3.0 </p> </td> <td> <p> 3.0 </p> </td> </tr> <tr> <td> <p> Solvent (w/w&nbsp;%) </p> </td> <td> <p> 97.0 </p> </td> <td> <p> 97.0 </p> </td> </tr> <tr> <td> <p> Viscosity (Brookfield,&nbsp;RVT,#6,5rpm) </p> </td> <td> <p> 60,000&nbsp;cps </p> </td> <td> <p> 80,000&nbsp;cps </p> </td> </tr> </tbody> </table> <br /> *This example is for reference. The formulation should be adjusted to the product requirement.<br /> http://www.acrylic-polymer.com/polymeric-thickener.html Polymeric Thickener http://www.acrylic-polymer.com/productpic/ps_cba1474855414.jpg http://www.acrylic-polymer.com/polymeric-thickener.html Cosmetic Emulsifier <img src='productpic/ps_x451474855719.jpg' /><br>Thickener DP-325 is a thickener and emulsifier which can emulsify oils in water and produce thick and stable emulsions for cosmetic applications with creamy and glide-on feel to meet the needs of most demanding formulations at low use level. It is a ready-to-use liquid copolymer (INCI name: Hydroxyethyl Acrylate/Sodium Acryloyldimethyltaurate Copolymer and Isoparaffin and Polysorbate 80) and is also developed for water based polymer products and polar organic solvents such as ethylene glycol, propylene glycol and glycerol.&nbsp; This product provides remarkable thickening power between pH 2 and pH 12, very good mechanical stability and electrolyte resistance and is especially suitable for product systems which poly-acrylic acid thickeners are not capable for the application requirements. The product can be used directly at room temperature and does not require the addition of ammonia or other alkali to the system.<br /> <br /> Thickener DP-325 has the following benefits:<br /> <ol> <li> Extremely easy to use and highly efficient </li> <li> Very stable emulsion for long-term uniform quality </li> <li> Excellent emulsifier for all types of oily phases </li> <li> Effective over a wide pH range </li> </ol> <br /> Typical Physical Properties<br /> <ol> <li> Appearance: Creamy liquid </li> <li> Solids: 47 ± 1.0% </li> <li> pH: 7.5 ± 1.0 </li> <li> Specific gravity: 1.22 </li> <li> Viscosity: around 100,000 cps (Brookfield RVT, #6, 5 rpm) </li> </ol> <br /> Method of Use and Example<br /> Water or solvent is added to the pre-weighed Thickener DP-325 with or without oil phase with gentle agitation until a smooth and homogeneous gel is formed. The results of three examples are shown in the following table:<br /> <table style="text-align:left;" width="450" cellspacing="0" cellpadding="0" border="1"> <tbody> <tr> <td> <p> Sample </p> </td> <td> <p> Viscosity (Brookfield&nbsp;RVT,#6, 5rpm) </p> </td> </tr> <tr> <td> <p> 2% DP-325 , 98% DI water </p> </td> <td> <p> &nbsp;60,000 cps </p> </td> </tr> <tr> <td> <p> 2% DP-325 , 98% propylene glycol </p> </td> <td> <p> &nbsp;31,000 cps </p> </td> </tr> <tr> <td> <p> 2% DP-325, 15% 2-ethylhexyl palmitate, 83% DI water </p> </td> <td> <p> &nbsp;58,200 cps </p> </td> </tr> </tbody> </table> <br /> These examples are for reference. The formulation should be adjusted to the product requirement. http://www.acrylic-polymer.com/cosmetic-emulsifier.html Cosmetic Emulsifier http://www.acrylic-polymer.com/productpic/ps_x451474855719.jpg http://www.acrylic-polymer.com/cosmetic-emulsifier.html Polymeric Thickeners <img src='productpic/ps_jh8x1474855866.jpg' /><br>Thickener DP-225 is a synthetic thickener containing 2-Acrylamido-2-methyl-propane sulfonic acid sodium salt (AMPS) copolymers dispersed in a paraffin solvent and is developed for water based polymer products and polar organic solvents such as ethylene glycol, propylene glycol and glycerol. This product provides remarkable thickening power between pH 2 and pH 12, very good mechanical stability and electrolyte resistance. It is especially suitable for product systems which poly-acrylic acid thickeners are not capable for the application requirements. The product can be used directly and does not require the addition of ammonia or other alkali to the system.<br /> <br /> Thickener DP-225 has the following benefits:<br /> <ol> <li> Extremely easy to use and highly efficient </li> <li> High electrolyte resistance </li> <li> Good thickener for polar solvents </li> <li> Excellent workability </li> <li> Effective over a wide pH range </li> </ol> <br /> Typical Physical Properties<br /> <ol> <li> Appearance: Creamy liquid </li> <li> Solids: 46.0 ± 1.0% </li> <li> pH: 8.0 ± 1.0 </li> <li> Specific gravity: 1.22 </li> <li> Viscosity: 30,000 ± 10,000 (Brookfield, RVT, #6, 5 rpm) </li> </ol> <br /> Method of Use and Example<br /> Water or solvent is added to the pre-weighed DP-225 with gentle agitation to prepare a thickener stock. The results of two examples are shown in the following table:<br /> <table style="text-align:left;" width="450" cellspacing="0" cellpadding="0" border="1"> <tbody> <tr> <td> <p> Solvent </p> </td> <td> <p> D.I. Water </p> </td> <td> <p> Propylene Glycol </p> </td> </tr> <tr> <td> <p> DP-225 (w/w&nbsp;%) </p> </td> <td> <p> 3.0 </p> </td> <td> <p> 3.0 </p> </td> </tr> <tr> <td> <p> Solvent (w/w&nbsp;%) </p> </td> <td> <p> 97.0 </p> </td> <td> <p> 97.0 </p> </td> </tr> <tr> <td> <p> Viscosity (Brookfield,&nbsp;RVT,#6,5rpm) </p> </td> <td> <p> 60,000&nbsp;cps </p> </td> <td> <p> 80,000&nbsp;cps </p> </td> </tr> </tbody> </table> <br /> *This example is for reference. The formulation should be adjusted to the product requirement. http://www.acrylic-polymer.com/polymeric-thickeners.html Polymeric Thickeners http://www.acrylic-polymer.com/productpic/ps_jh8x1474855866.jpg http://www.acrylic-polymer.com/polymeric-thickeners.html Synthetic Thickener <img src='productpic/ps_8bdw1474856179.jpg' /><br>Thickener AT-76 is a synthetic acrylic copolymer dispersed in a paraffin solvent. It is developed for water based polymer products, especially for the textile printing industry. The product can be used directly and does not require the addition of ammonia or other alkali to the system.<br /> <br /> Thickener AT-76 has the following benefits:<br /> <ol> <li> Extremely easy to use and highly efficient </li> <li> High electrolyte resistance and high flush resistance </li> <li> Superior definition and color yield </li> <li> Excellent workability </li> <li> Effective over a wide pH range </li> </ol> <br /> Typical Physical Properties<br /> <ol> <li> Appearance: Creamy liquid </li> <li> pH: 8.0 ±1.0 (light ammonia odor) </li> <li> Solids: 31.0 ±1.0% </li> <li> Specific gravity: 1.20 </li> <li> Viscosity: 20,000 ± 5,000 cps (Brookfield, RVT, #6, 5 rpm) </li> </ol> <br /> Method of Use and Example<br /> Water is added to the pre-weighed Thickener AT-76 with gentle agitation to prepare a thickener stock. Binder, pigment, and other ingredients of the printing paste formulation are then added to the thickener stock to make the final printing paste. For example, a printing paste with the composition of<br /> AT-76&nbsp;&nbsp; &nbsp;Water&nbsp;&nbsp; &nbsp;Acrylic binder&nbsp;&nbsp; &nbsp; Pigment paste<br /> &nbsp;3.0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 93.0&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 3.0 &nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp; &nbsp; 1.0 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; (w/w %)<br /> has a viscosity of 20,000 - 25,000 cps (Brookfield, RVT, #6, 5 rpm) and gives excellent print definition and color yield.<br /> *This example is for reference. The formulation should be adjusted to the product requirement.<br /> http://www.acrylic-polymer.com/synthetic-thickener.html Synthetic Thickener http://www.acrylic-polymer.com/productpic/ps_8bdw1474856179.jpg http://www.acrylic-polymer.com/synthetic-thickener.html Textile Thickener <img src='productpic/ps_3a871474856291.jpg' /><br>Thickener AT-73 is a synthetic acrylic copolymer dispersed in a paraffin solvent and is developed for water based polymer products. This product provides high thickening efficiency, short flow rheology, and very good mechanical stability. It is suitable for textile pigment printing industry, especially for the rotary screen-printing. Because of its' special molecular structure, it has a very high thickening efficiency and a unique rheology. The product can be used directly and does not require the addition of ammonia or other alkali to the system.<br /> <br /> Thickener AT-73 has the following benefits:<br /> <ol> <li> Extremely easy to use and highly efficient </li> <li> Excellent workability </li> <li> High electrolyte resistance and high flush resistance </li> <li> Superior definition and color yield </li> <li> Effective over a wide pH range </li> </ol> <br /> Typical Physical Properties<br /> <ol> <li> Appearance: Creamy liquid </li> <li> pH: 8.0 ±1.0 (light ammonia odor) </li> <li> Solids: 32.0 ±1.0% </li> <li> Specific gravity: 1.20 </li> <li> Viscosity: 25,000 ± 5,000 cps (Brookfield, RVT, #6, 5 rpm) </li> </ol> <br /> Method of Use and Example<br /> Water is added to the pre-weighed Thickener AT-73 with gentle agitation to prepare a thickener stock. Binder, pigment, and other ingredients of the printing paste formulation are then added to the thickener stock to make the final printing paste. For example, a printing paste with the composition of<br /> AT-73&nbsp;&nbsp; &nbsp;Water&nbsp;&nbsp; &nbsp;Acrylic binder&nbsp;&nbsp; &nbsp; Pigment paste <br /> &nbsp; 3.0&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; 93.0&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp; &nbsp; 3.0 &nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; 1.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; (w/w %)&nbsp;&nbsp; &nbsp;<br /> has a viscosity of 35,000 - 45,000 cps (Brookfield, RVT, #6, 5 rpm) and gives excellent print definition and color yield.<br /> *This example is for reference. The formulation should be adjusted to the product requirement. http://www.acrylic-polymer.com/textile-thickener.html Textile Thickener http://www.acrylic-polymer.com/productpic/ps_3a871474856291.jpg http://www.acrylic-polymer.com/textile-thickener.html Pigment Printing Thickener <img src='productpic/ps_l0m1474856407.jpg' /><br>Thickener AT-90 is a synthetic acrylic copolymer dispersed in a paraffin solvent and is developed for water based polymer products. This product provides high thickening efficiency, very good mechanical stability and electrolyte resistance. It is suitable for textile pigment printing industry, especially for the rotary screen-printing. Because of its' special molecular structure, it has a better dispersion power and electrolyte resistance. The product can be used directly and does not require the addition of ammonia or other alkali to the system.<br /> <br /> Thickener AT-90 has the following benefits:<br /> <ol> <li> Extremely easy to use and highly efficient </li> <li> High electrolyte resistance and high flush resistance </li> <li> Superior definition and color yield </li> <li> Excellent workability </li> <li> Effective over a wide pH range </li> </ol> <br /> Typical Physical Properties<br /> <ol> <li> Appearance: Creamy liquid </li> <li> pH: 8.0 ± 1.0 (light ammonia odor) </li> <li> Solids: 31.0 ±1.0% </li> <li> Specific gravity: 1.20 </li> <li> Viscosity: 20,000 ± 5,000 cps (Brookfield, RVT, #6, 5 rpm) </li> </ol> <br /> Method of Use and Example<br /> Water is added to the pre-weighed Thickener AT-90 with gentle agitation to prepare a thickener stock. Binder, pigment, and other ingredients of the printing paste formulation are then added to the thickener stock to make the final printing paste. For example, a printing paste with the composition of<br /> AT-90&nbsp;&nbsp; &nbsp;Water&nbsp;&nbsp; &nbsp;Acrylic binder&nbsp;&nbsp; &nbsp; Pigment paste <br /> &nbsp; 3.0&nbsp;&nbsp; &nbsp; &nbsp;&nbsp; 93.0&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp; &nbsp; &nbsp;&nbsp; 3.0 &nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp;&nbsp; 1.0&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;&nbsp; &nbsp; (w/w %)&nbsp;&nbsp; &nbsp;<br /> has a viscosity of 20,000 - 25,000 cps (Brookfield, RVT, #6, 5 rpm) and gives excellent print definition and color yield.<br /> *This example is for reference. The formulation should be adjusted to the product requirement.<span id="__kindeditor_bookmark_start_0__"></span><br /> http://www.acrylic-polymer.com/pigment-printing-thickener.html Pigment Printing Thickener http://www.acrylic-polymer.com/productpic/ps_l0m1474856407.jpg http://www.acrylic-polymer.com/pigment-printing-thickener.html Lamination Adhesive <img src='productpic/ps_16i31474856539.jpg' /><br>Lamination Adhesive LA-220 a water-based acrylic-styrene copolymer which is designed as an adhesive for the lamination of BOPP and PET film on printed paper or cardboard. It dries fast to fit the demand of high conveyer speed and offers excellent adhesion between printed paper and BOPP film. It makes the paper or cardboard exhibit excellent transparency, gloss and smoothness.<br /> <br /> Typical Physical Properties<br /> <ol> <li> Composition: Acrylic-styrene copolymer </li> <li> Appearance: Milky white liquid </li> <li> pH: 7.5 ±1.0 </li> <li> Solids: 48.0 ±1.0% </li> <li> Particle Size: ~ 200nm </li> <li> Viscosity: 150 ± 100 cps (RVT, #3, 10rpm) </li> <li> Tg: about -15℃ </li> </ol> http://www.acrylic-polymer.com/lamination-adhesive.html Lamination Adhesive http://www.acrylic-polymer.com/productpic/ps_16i31474856539.jpg http://www.acrylic-polymer.com/lamination-adhesive.html